Magnetic Truck Door Sign Ontario
Regulation-grade company name lettering for Canadian operators. Cut fast from Niagara on 5+ year outdoor vinyl — ships before 2 PM.
Configure Your Lettering
Enter your details below. Our builder validates your input against Canadian regulations in real-time.
Regulatory Requirements
Ontario HTA s.16 requires the name of the registered owner or lessee on both sides of commercial vehicles. Must be clearly legible, minimum 2" height, and match your CVOR certificate exactly.
Your registered company or operating name as it appears on your CVOR certificate.
We confirm your text and layout before cutting. No payment until you approve your proof.
What You Get
Swap your commercial door identification between trucks in seconds — no tools, no adhesive residue, no damage to a leased cab. These magnetic truck door signs are printed in Canada on highway-rated magnetic stock, built to the published Ontario Highway Traffic Act legibility standards for commercial vehicles over 4,500 kg GVW.
- Highway-rated magnetic backing engineered to hold at speed through Ontario winters, road vibration, and truck wash cycles
- UV-resistant ink that holds colour through sun, salt, and seasonal exposure
- Rounded corners to prevent edge lift and protect cab paint
- Printed in Canada on Canadian equipment with Canadian materials
How It Works
Press the sign to the door and go. At the end of the shift, pull it off, store it, and mount it to the next truck. No heat gun, no scraper, no trip to the graphics shop. For owner-operators on leased cabs or sub-contractors moving across carriers, that is the difference between a five-second swap and a full re-decal job.
- Instant transfer with no tools required
- No adhesive residue — lease-return ready every time
- Reusable across your entire fleet without affecting hold strength
Why It Works
Cheap sheet magnets are a different product. This backing is rated for highway speeds, and the print layout is designed to support the name, address, and CVOR number legibility standards set out in the HTA — so what an MTO inspector sees at a weigh station is a clean, readable sign, not a faded decal or a lifted edge. Vinyl stickers cost less upfront but stay on one cab. A magnetic sign follows the operator, not the truck.
- Built to the published HTA legibility and dimensional standards for commercial vehicle door identification
- Magnetic stock rated for highway speeds — not the consumer-grade sheet magnet sold at office supply stores
- All-season performance designed for Ontario road conditions: winter cold, highway vibration, and regular washing
- One sign serves multiple vehicles — the practical choice for any rotating fleet or multi-carrier sub-contracting operation
Keep every truck in your fleet properly identified without picking up a scraper — order your magnetic truck door signs today.
Frequently Asked Questions
Magnetic signs are removable and may suit temporary business identification. For durable fleet ID or US-bound carrier markings, use permanent vinyl and provide the exact operator details during intake.
Regulations last verified: June 2026
Sources: HTA s. 16 · O.Reg 424/97 · O.Reg 413/05 · 49 CFR 390.21
Checked quarterly against latest Transport Canada and MTO updates.
Applicable Regulations
Ontario CVOR certificate must be carried in the cab. Exterior CVOR references are professional fleet ID; US-bound USDOT markings are governed by FMCSA 49 CFR 390.21.
Ontario CVOR operators must carry the CVOR certificate in the vehicle. This site does not treat HTA s.16 or O.Reg 424/97 as an exterior CVOR display rule.
Verified source for the Ontario CVOR certificate carry rule; no exterior CVOR marking, height, colour, or door-placement rule.
Mandates GVW rating display on commercial vehicles.
Requires USDOT number on both sides of all commercial motor vehicles operating in interstate commerce.
Free tool — verify your vinyl colour meets MTO high-contrast requirements before ordering.
Technical Specifications
| Compliance Type | Company Name |
| Minimum Height | 2" |
| Maximum Width | 48" |
| Default Typeface | Bebas Neue |
| Required Format | Your registered company or operating name as it appears on your CVOR certificate. |
| Vinyl | premium-outdoor-vinyl |
| Outdoor Rating | 5+ years UV / weather resistant |
| Application | Self-adhesive, wet or dry application |
| Production | Fast turnaround, ships from Ontario |
| Compliance | Transport Canada / MTO validated |
Regulation Change Alerts
Get notified when Transport Canada or MTO changes lettering requirements. Free. No spam. Unsubscribe anytime.
CASL compliant. We only send regulation updates. Unsubscribe link in every email.